【软管泵】水渠机采购

软管泵可应用于多用移动泵站的结构 :自吸高度可达到9米，水平自吸可达200米以上，无需灌泵。特别适合于市政下水道系统的污水、污泥抽排。无堵塞、杂质通过能力强。普通的塑料袋、沙石、编织袋、泥浆、毛发等杂物都不会影响泵的使用。采用原轮泵，耐干运行，泵体坚固耐用、寿命长。使用快速连接接头，方便进出口管道的装配。 整车设计紧凑、适应于狭小空间使用。使用便捷拆卸式防雨布、或硬质钢板隔音罩，低噪音设计，符合环保标准要求。

The hose pump can be applied to the structure of a multi-purpose mobile pumping station: self-priming height can reach 9 meters, horizontal self-priming can reach more than 200 meters, no need for drainage irrigation pump. Particularly suitable for sewage and sludge drainage in municipal sewer systems. No blocking, strong ability to pass impurities. General plastic bags, sand, woven bags, mud, hair and other sundries will not affect the use of the pump. The original wheel pump is resistant to dry running, and the pump body is durable and durable. Use quick connect joints to facilitate the assembly of inlet and outlet pipes. The complete vehicle design is compact and suitable for use in small spaces. Easy-to-remove rainproof cloth or hard steel sound insulation cover, low noise design, meet environmental protection standards.

 

软管泵维护
 1、软管的更换与调整
（1）更换软管时，先将两端管卡螺栓松掉，并将管卡拆下，再将其中一端的吊圈螺栓松掉，将一端短管从胶管中抽出，点动电机将胶管自泵内推出；然后将新的软管从拆下短管的一端插入泵壳与压辊之间，点动电机，将软管装入；再将吊圈固定、管卡装上，至此更换任务完成。尤其注意再安装软管时，务必将软管与泵壳贴紧，确认后方能投入正常运行。
（2）软管使用200小时左右，可将软管转动90度，对单管软管泵除转动方向外，还可前后抽动软管，以改变软管的压点，延长软管的使用寿命。